DO NOT TOUCH TERMINALS – ANSI COMPLIANCE PV Solar Warning Label 4″ X 3″ Premium outdoor rated vinyl label, ANSI colors. Minimum 3/16″ letter height Permanent adhesive Polyester film lamination Per NEC 690.17(E) Switch or Circuit Breaker, place on AC Disconnect, Service Panel and any subpanels that are backfed by PV system. *NEC 690.17(E) Having an interrupting rating sufficient for the nominal circuit voltage and the current that is available at the line terminals of the equipment. Where all terminals of the disconnecting means may be energized in the open position, a warning sign shall be mounted on or adjacent to the disconnecting means. The sign shall be clearly legible and have the following works or equivalent: WARNING ELECTRIC SHOCK HAZARD. DO NO TOUCH TERMINALS. TERMINALS ON BOTH THE LINE AND LOAD SIDES MAY BE ENERGIZED IN THE OPEN POSITION. Exception: A connector shall be permitted to be used as an AC or DC disconnecting means, provided that it complies with the requirements of 690.33 and is listed and identified for the use. *NEC code reference is for information only. Refer to the NEC 2014 guide for complete descriptions. Permanent adhesive bonds well to low and high surface energy plastics, painted metals, powder coated paint, polycarbonate and fiberglass. Premium Vinyl Material: Flexcon DPM FWS White Vinyl. This is a 3.5 mil flexible white vinyl recoginized under UL 969 – UL file number PGGU2.MH10170. Ships Quickly from Global Solar Supply.