- 8 Amp 36 Volt MPPT Charge Controller, Made in USA
- 99% Peak Efficiency, Continuous MPPT, Advanced electronic protections
- The built-in LED will quickly tell you that you’ve installed the controller correctly.
- Scans the entire voltage range every 30-60 seconds.
- Provide reliable power in the harshest environments
Most solar charge controllers move power from a higher voltage panel to a lower voltage battery bank. The GVB-series controllers, in contrast, pump electricity up hill. These controllers will take a lower voltage panel and boost the voltage to charge a 24V, 36V or 48V battery pack. In fact, the GVB’s will work with almost any panel that’s below your battery voltage. Larger panels are cheaper per Watt than smaller panels, so using one large panel and a boost controller results in a significantly lower system cost than smaller panels in series with a conventional charge controller.Genasun controllers are deployed to the most remote locations on earth. They endure years at sea, harsh Antarctic winters, freezing conditions in the upper atmosphere on solar powered airplanes, and in a few off-the-map locations. Made in the USA, each controller is put through complete electrical testing to ensure reliability. If you need mission-critical power, this is your controller. Not all Maximum Power Point Tracking controllers were created equally. Most use a sweep and sleep method that scans the entire voltage range every 30-60 seconds. That’s okay for a clear day, with a stationary panel. But moving vehicles and changing cloud cover require a faster, more advanced controller. Genasun controllers adapt to changing light conditions 15 times every second. They are always on target, capturing every bit of available sunshine. Simply put, other controllers can’t keep up. GVB-8-Pb-36V
Be the first to review “Genasun 8 Amp 36 Volt MPPT Solar Boost Charge Controller GVB-8-Pb-36V”
You must be logged in to post a review.