SOLAREDGE, P300-5 SERIES, DC OPTIMIZER, 300W, MC4 TYPE INPUT Subtotal: $98.00
AC DISTRIBUTION PANELS, CIRCUIT BREAKERS AND FUSES, DC DISTRIBUTION PANELS, ELECTRICAL DISTRIBUTION EQUIPMENT, ELECTRICAL PANELS
Midnite Solar-MNE250STS-L
Availability:
Out of stock
Please Note that this Item Ships direct from the Manufacturer.
- Main Breaker Current Rating – 250A
- Number of spaces – 9
- Environmental Rating – Type 1 (Indoor)
- Max. Wire Size – 4/0
- Max. AC Voltage – 277VAC
- Max. DC Voltage – 300VDC
- Warranty – 5 yrs.
- Listed by ETL for US & Canada
- Made in the USA
$553.00
Out of stock
A MidNite Solar E-panel is an AC/DC Disconnect Box that has the Inverter installed on the door of the
E-Panel or above the E-panel. MidNite’s E-Panels place the AC and DC breakers in the same
Disconnect Box for a compact solution. MidNite makes E-Panels for Magnum, Outback, Schneider
Conext SW, Schneider XW and SMA Sunny Islands. Each E-Panel contains a battery disconnect
breaker, AC input and output breakers with appropriate bus bars, 120V and 120/240V
configurations, bypass breaker, neutral and ground bus bars, shunt and mounting hardware. All units
have knockouts for surge protection and conduit connections. The E-panels all have spaces for
additional breakers such as for charge controllers and loads.
Magnum Energy 120VAC E-Panels for MS and RD series
Magnum Energy makes a very interesting line of inverters, both modified and pure sine wave. Internal AC wires are routed to match the Magnum inverter. The accessory components like the DC cover, top shield, remote bracket and such are specific to the Magnum E-Panels. The Magnum has a PV input plus and DC plus busbar as well as the regular AC input and output busbars. This chassis is 14.4 inches
wide, so has ample room for all your wiring needs. The chassis is only 3.5″ deep so wiring access is the best in the industry. All of the present 12 and 24
volt / 120VAC Magnum inverters have a 120VAC inverter/charger input/output as well as a 120VAC
input/output that does not go through the electronics. It is strictly a pass through for the other leg of
a 240VAC input.
The pass through leg can be useful when attempting to utilize both legs of a 240VAC generator. One
leg is used for charging and the other is used to pass through to your 240VAC deep well pump. The
120VAC E-Panel here is not able to handle the extra leg of AC, so look to the 240 E-Panel to
accommodate this unique feature. Normal installations jumper AC 1 & 2 on the inverter for 50 amp
service at 120VAC.
A major advantage of these E-Panels is that they can be tested in the shop to insure that the system
is functioning properly. These E-Panels can be field modified to be right hand units. A right hand door
is required to do this in the field.
E-Panel or above the E-panel. MidNite’s E-Panels place the AC and DC breakers in the same
Disconnect Box for a compact solution. MidNite makes E-Panels for Magnum, Outback, Schneider
Conext SW, Schneider XW and SMA Sunny Islands. Each E-Panel contains a battery disconnect
breaker, AC input and output breakers with appropriate bus bars, 120V and 120/240V
configurations, bypass breaker, neutral and ground bus bars, shunt and mounting hardware. All units
have knockouts for surge protection and conduit connections. The E-panels all have spaces for
additional breakers such as for charge controllers and loads.
Magnum Energy 120VAC E-Panels for MS and RD series
Magnum Energy makes a very interesting line of inverters, both modified and pure sine wave. Internal AC wires are routed to match the Magnum inverter. The accessory components like the DC cover, top shield, remote bracket and such are specific to the Magnum E-Panels. The Magnum has a PV input plus and DC plus busbar as well as the regular AC input and output busbars. This chassis is 14.4 inches
wide, so has ample room for all your wiring needs. The chassis is only 3.5″ deep so wiring access is the best in the industry. All of the present 12 and 24
volt / 120VAC Magnum inverters have a 120VAC inverter/charger input/output as well as a 120VAC
input/output that does not go through the electronics. It is strictly a pass through for the other leg of
a 240VAC input.
The pass through leg can be useful when attempting to utilize both legs of a 240VAC generator. One
leg is used for charging and the other is used to pass through to your 240VAC deep well pump. The
120VAC E-Panel here is not able to handle the extra leg of AC, so look to the 240 E-Panel to
accommodate this unique feature. Normal installations jumper AC 1 & 2 on the inverter for 50 amp
service at 120VAC.
A major advantage of these E-Panels is that they can be tested in the shop to insure that the system
is functioning properly. These E-Panels can be field modified to be right hand units. A right hand door
is required to do this in the field.
These make your wiring of your solar system much cleaner and easier
| Dimensions | 28.00 × 19.00 × 11.00 in |
|---|
Based on 0 reviews
Be the first to review “Midnite Solar-MNE250STS-L”
You must be logged in to post a review.
There are no reviews yet.