, ,

Schneider XW 80A 600VDC MPPT Charge Controller RNW8651032

Availability:

Out of stock


 

Features

  • MPPT Range: 195 to 510 Vdc
  • Up to 600 Vdc input
  • Battery Type Settings: FLA, AGM, Gel, Custom

Overview

The Schneider Electric Conext MPPT?80 600 is an innovative solar charge controller that offers an industry-first set of features: high PV input voltage of up to 600 Vdc,?Maximum Power Point Tracking (MPPT), and 80 A charge current. 600Vdc PV input voltage delivers lower installation costs through fewer PV strings,?longer home runs, smaller wiring and conduit. MPPT technology helps harvest the?most energy available from the PV array, regardless of environmental conditions. 80 A battery charge current allows for connection of arrays?rated at up to 4800 W with a 48 V battery bank.

Schneider XW 80A 600VDC MPPT Charge Controller RNW8651032

Schneider XW 80A 600VDC MPPT Charge Controller RNW8651032 Installation Guide?

 

$1,500.00

Out of stock

The XW-MPPT80-600 can accommodate open circuit voltages of up to 600 VDC, which reduces wiring needs, increases module selection and string sizing flexibility, and enables greater distance between the power source and battery bank. The MPPT PV array input window is 195 to 550 VDC, which supports an output of up to 80 A for 24 or 48 VDC battery banks. Standby power draw is less than 1 W.

The charge controller has a configurable single-function auxiliary output to drive a load control relay or to activate devices such as vent fans or indicator alarms. Full output current of 80 A is available without de-rating in ambient temperatures up to 113 °F (45 ºC). Over-temperature protection de-rates the power throughput when ambient temperatures are higher. The XW-MPPT80-600 also features protections for input over/under voltage, output over current, and back-feed (reverse current). Built-in ground-fault protection (GFP) eliminates the need for a separate GFP breaker. This unit is configurable for positive, negative, and ungrounded PV systems.

The XW-MPPT80-600 can be used with the XW power distribution panel, or stand-alone in other PV systems, with a Square-D HU361RB 600 VDC array disconnect. Use a 100 A breaker on the battery side of the controller.

A battery temperature sensor is included with the controller. The XW-MPPT80-600 is compatible with Xanbus-enabled devices, such as the XW Series inverter/charger, the System Control Panel, XW Automatic Generator Start Module, and other XW solar charge controllers through the Xanbus network. It can also be installed in a stand-alone mode with an XW System Control Panel.

XW-MPPT80-600 dimensions are 30″H x 8.63″W x 8.63″D, weight is 29.8 lbs. and it is covered by a 5-year warranty with an optional extension to 10 years. Listed to UL 1741 and CSA 107.1 for the U.S.A. and Canada.

Weight 45 lbs
Dimensions 45 × 10 × 10 in

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Schneider XW 80A 600VDC MPPT Charge Controller RNW8651032”

There are no reviews yet.