The new SolaDeck 0799 enclosures are NEMA 3R and listed to the UL 1741 standard. All SolaDeck models are seamless with a roofing industry approved flashing. SolaDeck parts are all made from 18- gauge galvanized steel with a powder-coated finish (Gray or Black) providing a professional look. The 0799 Soladeck Enclosure is also available in Stainless steel. The overall depth of the enclosure is 3”. Every enclosure has an 8” long 35mm din rail installed for fuse holders, breakers or terminal blocks and include a 5-position ground bar. There are 5 knockouts inside the enclosure (3) – 1/2”, (1) – 3/4” and (1) – 1” for cable or conduit to penetrate the roof deck. The SolaDeck base has dimple locations to enter the enclosure above the roof deck with conduit or gland fittings. These dimple locations can be punched or drilled out. Corner dimples will accept up to 1” fittings or conduit, the 3 center dimples will accept up to ¾” fittings or conduit.
Combiner and pass through kits are available and include the necessary components to either combine strings, circuits or to transition PV wire to THHN wire and pass-through. To make pass-through connections inside a SolaDeck, use one of PASS-THRU kits. These kits include din rail mount terminal blocks that can be used with 16 to 6 AWG wire and hardware to hold them in place. Each terminal is 8mm wide. Kits also include gland fittings, end plates and rail stops. See our Din Rail terminal blocks for the PASS-THRU kits.