Special Offer
Save $801.00
SCHNEIDER, XW+5548 NA, BATTERY INVERTER, GRID TIE, 5.5 KW, 48 VDC, 120/240VAC 60HZ, 865-5548-01
$2,999.00
Already Sold: 0
Available: 1
Hurry Up! Offer ends in:
-
SOLAR BATTERIES, SOLAR CABLES, SOLAR PRODUCTS MADE IN THE USA
12″ 2/0 AWG RED BATTERY INTERCONNECT CABLE 3/8″ LUGS BATTERY BANKS, OFF GRID SOLAR APPLICATIONS
SOLAR BATTERIES, SOLAR CABLES, SOLAR PRODUCTS MADE IN THE USA12″ 2/0 AWG RED BATTERY INTERCONNECT CABLE 3/8″ LUGS BATTERY BANKS, OFF GRID SOLAR APPLICATIONS
SKU: n/a$23.68 -
BATTERY & WELDING CABLE, SOLAR CABLES, SOLAR PRODUCTS MADE IN THE USA
12″ 2/0 AWG BLACK BATTERY INTERCONNECT CABLE 3/8″ LUGS BATTERY BANKS, OFF GRID SOLAR APPLICATIONS
BATTERY & WELDING CABLE, SOLAR CABLES, SOLAR PRODUCTS MADE IN THE USA12″ 2/0 AWG BLACK BATTERY INTERCONNECT CABLE 3/8″ LUGS BATTERY BANKS, OFF GRID SOLAR APPLICATIONS
Features
- Durable
- Long lasting
- Assembled in the USA
Overview
Why use larger cable? Very high current flows in the cables that connect an inverter to the batteries, even in a low-voltage power system. Household appliances can draw over 100 amps, and motors may draw up to 500 amps. Larger cables allow the inverter to draw the current needed to support a large load. Use these cables between individual battery cells or between battery banks. Use 2/0 cables for 175-amp and 200-amp fuses. Circuits protected by 250-amp breakers or 400-amp fuses should use 4/0 cables. Cables are marked in red heat-shrink tubing for positive and white on black heat-shrink for negative.
Features of the 12″ cable plated copper lugs: These UL-listed lugs are made from tin-plated copper tubing with 3/8″ holes, soldered or crimped to a stranded cable.
Heat-shrink tubing: This tubing insulates the copper lugs and compression terminals. Tubing shrinks and glue inside melts when heated, sealing wires against corrosion and moisture.
UL-listed battery cable: This fine-stranded, very flexible cable is UL-listed for use as battery cable. It is rated MTW/THW/AWM, 600 volt, sunlight resistant, direct burial, 105 degrees C. Color: Black, Length: 12″.
SKU: n/a$25.00 -
CABLE & LUGS, SOLAR BATTERIES, SOLAR CABLES, SOLAR PRODUCTS MADE IN THE USA
18″ 2/0 AWG Black Battery Cable 3/8″ Lugs, Off Grid Solar Applications
CABLE & LUGS, SOLAR BATTERIES, SOLAR CABLES, SOLAR PRODUCTS MADE IN THE USA18″ 2/0 AWG Black Battery Cable 3/8″ Lugs, Off Grid Solar Applications
SKU: n/a$36.68
Products Grid
Best Sellers
Recently Added
MOUNTS & FLASHING, SOLAR PRODUCTS MADE IN THE USA, SOLAR RACKING & MOUNTING
Quick Mount PV: QUICK HOOK® Low Height Hook Mill finish model QMHLS
MOUNTS & FLASHING, SOLAR PRODUCTS MADE IN THE USA, SOLAR RACKING & MOUNTING
Quick Mount PV: QUICK HOOK® Low Height Hook Mill finish model QMHLS
SKU: GSS-QMHLS A 1
$19.99
INVERTERS, MOBILE RATED INVERTERS, OFF GRID BATTERY INVERTERS
COTEK SP2000-112 2000 Watt 12 Volt Pure Sine Wave Inverter
INVERTERS, MOBILE RATED INVERTERS, OFF GRID BATTERY INVERTERS
COTEK SP2000-112 2000 Watt 12 Volt Pure Sine Wave Inverter
WIDE INPUT VOLTAGE RANGE 10.5-16.5V: With wide input voltages, this equipment fulfills the majority user applications. To make a full use of it’s batteries in maximizing the operation time, a wide input range is therefore required. This allows the system to continue operating even when the supply voltage is not stable. And by choosing a wide input range, the same part can be used in several different situations and thereby cutting the costs.
POWER SAVING MODE SELECTABLE: SP2000-112 is suitable from different user scenarios to active power saving mode. It allows you to maximise your autonomy. The Power Saving Mode feature will shut off various connections to minimise power consumption by using only the essential and needed functions.
INPUT AND OUTPUT FULLY ISOLATION: SP2000-112 offers Input Protection against Reverse Polarity (Fuse), Under Voltage and Over Voltage. It also has a design for Output Protection against Short Circuit, Overload and Over Temperature. With these advanced protection features, it prevents the equipment from electrical shocks. It also has Temperature and Load Controlled Cooling Fan.
LOW PROFILE DESIGN: Stylish ID design and saving space for installation. The latest SP series pure sine wave inverter 2000W implements a state of the art design topology with the following advanced functions such as Wide DC input voltage and Wide Operating Temperature to fulfill majority of applications. It has Low profile and stylish design with output voltage selectable switch that makes the product more user friendly.
RS 232 PROTOCOL COMMUNICATION: With RS 232, it provides alternative solutions to set the parameters. It also has a built in advance microprocessor to provide friendly interface. It also has the ability to Control “Fault” Alarm and Power ON/OFF remotely using an optional Remote Controller CR-8 / CR-16.
SKU: GSS-SP2000-112
$639.00
INVERTERS, MOBILE RATED INVERTERS, OFF GRID BATTERY INVERTERS
COTEK SP700-112 700 Watt 12 Volt Pure Sine Wave Inverter
INVERTERS, MOBILE RATED INVERTERS, OFF GRID BATTERY INVERTERS
COTEK SP700-112 700 Watt 12 Volt Pure Sine Wave Inverter
WIDE INPUT VOLTAGE RANGE 10.5-16.5V: With wide input voltages, this equipment fulfills the majority user applications. To make a full use of it’s batteries in maximizing the operation time, a wide input range is therefore required. This allows the system to continue operating even when the supply voltage is not stable. And by choosing a wide input range, the same part can be used in several different situations and thereby cutting the costs.
POWER SAVING MODE SELECTABLE: SP700-112 is suitable from different user scenarios to active power saving mode. It allows you to maximise your autonomy. The Power Saving Mode feature will shut off various connections to minimise power consumption by using only the essential and needed functions.
INPUT AND OUTPUT FULLY ISOLATION: This prevents from electrical shock with advanced protection features. It also has Temperature and Load Controlled Cooling Fan.
LOW PROFILE DESIGN: With Stylish ID design ultimately saving space for installation. The design also has the ability to Control “Fault” Alarm and Power ON/OFF remotely using an optional Remote Controller CR-8 / CR-16.
RS 232 PROTOCOL COMMUNICATION: With RS 232 Protocol, it provides alternative solutions to set the parameters. It also has a built in advance microprocessor to provide friendly user interface.
SKU: GSS-SP700-112
$314.00
INVERTERS, MOBILE RATED INVERTERS, OFF GRID BATTERY INVERTERS
COTEK SP1000-112 1000 Watt 12 Volt Pure Sine Wave Inverter
INVERTERS, MOBILE RATED INVERTERS, OFF GRID BATTERY INVERTERS
COTEK SP1000-112 1000 Watt 12 Volt Pure Sine Wave Inverter
WIDE INPUT VOLTAGE RANGE 10.5-16.5V: With wide input voltages, this equipment fulfills the majority user applications. To make a full use of it’s batteries in maximizing the operation time, a wide input range is therefore required. This allows the system to continue operating even when the supply voltage is not stable. And by choosing a wide input range, the same part can be used in several different situations and thereby cutting the costs.
POWER SAVING MODE SELECTABLE: SP1000-112 is suitable from different user scenarios to active power saving mode. It allows you to maximise your autonomy. The Power Saving Mode feature will shut off various connections to minimise power consumption by using only the essential and needed functions.
INPUT AND OUTPUT FULLY ISOLATION: SP1000-112 offers Input Protection against Reverse Polarity (Fuse), Under Voltage and Over Voltage. It also has a design for Output Protection against Short Circuit, Overload and Over Temperature. With these advanced protection features, it prevents the equipment from electrical shocks. It also has Temperature and Load Controlled Cooling Fan.
LOW PROFILE DESIGN: Stylish ID design and saving space for installation. The latest SP series pure sine wave inverter 1000W implements a state of the art design topology with the following advanced functions such as Wide DC input voltage and Wide Operating Temperature to fulfill majority of applications. It has Low profile and stylish design with output voltage selectable switch that makes the product more user friendly.
RS 232 PROTOCOL COMMUNICATION: With RS 232, it provides alternative solutions to set the parameters. It also has a built in advance microprocessor to provide friendly interface. It also has the ability to Control “Fault” Alarm and Power ON/OFF remotely using an optional Remote Controller CR-8 / CR-16.
SKU: GSS-SP1000-112
$349.00
