GV-10-Pb-12V 10 Amp 12 Volt MPPT Charge Controller, Made in USA
99.85% Peak Efficiency, Continuous MPPT, Advanced electronic protections
Small, critically efficient, and cost-effective, Provide reliable power in the harshest environments
The built-in LED will quickly tell you that you’ve installed the controller correctly.
Scans the entire voltage range every 30-60 seconds. Tiny self-consumption (0.12mA)
The GV-10 was designed to maximize the usable energy from a 140W panel. With Continuous Maximum Power Point Tracking, and night consumption of only 0.9mA, the GV-10 delivers results. In fact, the GV-10 is so effective at increasing panel output, it lowers your system cost ($/W) compared to a PWM controller and larger panel. Genasun controllers are deployed to the most remote locations on earth. They endure years at sea, harsh Antarctic winters, freezing conditions in the upper atmosphere on solar powered airplanes, and in a few off-the-map locations. Made in the USA, each controller is put through complete electrical testing to ensure reliability. If you need mission-critical power, this is your controller.Not all Maximum Power Point Tracking controllers were created equally. Most use a sweep and sleep method that scans the entire voltage range every 30-60 seconds. That’s okay for a clear day, but traditional controllers are constantly off target during changing cloud conditions – exactly when power is scarce and needs the most. Genasun controllers adapt to changing light conditions 20 times every second. They are always on target, capturing every bit of available sunshine. Simply put, other controllers can’t keep up.Precise computer controlled charging ensures the optimal charge cycle for your battery. This increases the battery life, and maximizes battery capacity.
Be the first to review “Genasun GV-10-Pb-12V, 10 Amps 12 Volts 140 Watts MPPT Solar Charge Controller for Lead Acid”
You must be logged in to post a review.