The SkyBox hybrid grid tie inverter can be used as a grid-tie inverter with or without a battery. When used with a battery it can be used to enhance self-supply of solar energy. This is useful when net-metering, or grid feed is not available, or not advantageous financially. This system uses DC coupling for both the solar and the connection to the battery system for greater overall efficiency. The SkyBox uses any commonly available 48 VDC battery bank, any lead type, flooded, AGM, or gel, and many Lithium batteries. PV input voltage range is 200-600 VDC, allowing longer PV strings. Compliant with California rule 21 and Hawaii 14H grid support requirements.
The system features backup power; grid support; net metering; non-export; and prioritized charging from renewable’s. These features can use any of the loads in the house, including those on the main service panel, what we call “primary” self-supply.Backup power is available to the loads connected to the backup loads panel, with a quick transfer time of 20 ms. Backup power capacity is 5 kW. The inverter has ground fault and arc fault protection built in. CT’s can be installed on the house AC lines for export control. 5 year warranty. 47″ H x 21″ W x 9.4″ D, 110.6 lbs.
- 5,000 W backup power at 120/240 VAC
- Meets CA rule 21 and HI 14H grid connection requirements
- NEMA 3R outdoor rated
- Internal Arc Fault Circuit Interrupter (AFCI) for added safety per NEC 2011: 690.11
- Maximum backfeed to array is <8ms
- Monitor and control over the internet using OPTICS RE
- Balance of Systems in one box
- Built-in battery system monitoring
- Inverter operating temperatures of -6 °F to +140 °F (-20 °C to +60 °C).
- Link to Outback power Skybox Specification Sheet
- Link to Outback power Skybox Users Manual
- Link to Outback power Warranty information for the Skybox